Engine mounts for Diesel installation in 101

jon goalen · **Posted:** Sun May 20, 2012 7:23 am

Engine mounts for 200 Tdi when using the original Lt95 gearbox [101 gearbox, short bell housing]
These bolt straight on NO modifications to the chassis necessary.
£350 per set plus postage

[Not suitable for 300 Tdi]

Tog · **Posted:** Sun May 20, 2012 5:39 pm

When are you doing 300tdi ones Jon? I've got my engine now, but your going away for a year. Guess I'll have to do it myself now.

jon goalen · **Posted:** Sun May 20, 2012 8:51 pm

I'm not going till later in the year but I still have my workshop till the end of the summer so still time to get it in.
I'm not doing 300 Tdi ones as it cannot be done in the same way!
The 300 mounts are about 6" further back so have to be fabricated, the problem is that the 300 exhaust down pipe is where the 101 chassis mount is and on the otherside the oil filter is where the chassis mount is.
The only way around this is to remove the chassis mount from the 101 chassis if connecting to the lt95 101 box.

spongie · **Posted:** Sun May 20, 2012 8:58 pm

Jon can you not put a different engine mount on the block on the other side to line up with the 101 chassis mount and then make a new mount on the filter side.

I'm PMing you with what I mean.

offroadstevie_uk · **Posted:** Sun May 20, 2012 11:34 pm

£350....

How many carats would they be?.

AndyHill · **Posted:** Mon May 21, 2012 6:20 am

Some photos of my own made engine mounts in my BLOG

|
|
\ /

jon goalen · **Posted:** Mon May 21, 2012 7:13 am

Some people can't weld but would like to put a diesel engine in so if you can then you don't need to buy these.
If you can't weld and want some they are now available.
They will also put the engine in the right place which is quite important!!

morph · **Posted:** Mon May 21, 2012 8:53 am

jon goalen wrote:

Some people can't weld but would like to put a diesel engine in so if you can then you don't need to buy these.
If you can't weld and want some they are now available.
They will also put the engine in the right place which is quite important!!

most people cant weld. some think they can. - im not one - i cant.

nicoo · **Posted:** Mon Jun 06, 2022 7:27 pm

Hi are they still avaliable?

Engine mounts for Diesel installation in 101

Who is online