Restoration parts required.

bjj101 · **Posted:** Wed Apr 24, 2019 11:21 am

So now I am retired (and the kitchen has been replaced) I'm allowed to start the truck refurbishment. There are lost of bits that I need to get, some of which are in the Club shop or other sources, but first I thought I'd ask here in case anyone has stuff to sell.

I do need a pair of propshafts and some rear shocks but they will probably be shop items. Other requirements include:

This is all for my RHD GS:
Body.
Diagonal hood bracing sticks, 4 lateral + 4 longitundinal.
Spare week mounting, any / all of the bits from the seat backrest upwards.
Rear pilar stiffeners, left and right (398455 and 398454).
Rear numberplate mounting plate.
Rear numberplate catch, both parts.
Reinforcing plates for Towing pintles, front and rear.
Battery top panel. (398852)
Fuel filler neck (595232).
Heater vents and ducts, everything except the heaterbox and the air box which I now have.

Engine / trans.
Rocker covers, left and right.
Transfer box high ratio gear set.
Diff lock actuator valve.
Oil cooler.
Brake shuttle valve and switch.

Other.
Water temperature gauge.
Speedo trip reset cable.
IR light switch.

Overdrive

and winch

markspiers · **Posted:** Fri Apr 26, 2019 9:46 pm

I have a few bits in the garage, will try and have a sort out over weekend

Brinv8 · **Posted:** Tue Apr 30, 2019 9:07 am

Have a couple of items from your wish list which may be useful for you.

Both end panels and front panel for the battery box.
&
End terminal air box for the heater system, without the bulls eye vents.

Have tried several times to put photos up but having issues with this web site, and am now fed up with trying, my poor finger tips are turning scarlet with all the keyboard use.

Brinv8 · **Posted:** Tue Apr 30, 2019 9:08 am

One - Battery Box

Brinv8 · **Posted:** Tue Apr 30, 2019 9:09 am

Two - Air Box

Brinv8 · **Posted:** Tue Apr 30, 2019 9:10 am

Done it... at great expense of my finger tips.

bjj101 · **Posted:** Wed May 01, 2019 8:54 am

Sorry about the fingers.
I'm interested. I will PM about cost and delivery.

Brinv8 wrote:

Done it... at great expense of my finger tips.

Brinv8 · **Posted:** Thu May 02, 2019 2:05 pm

Hi Brian, have left message on your phone and email.

bjj101 · **Posted:** Thu May 02, 2019 3:24 pm

Addition to shopping list:

In tank fuel pump
Fuel filter
Fuel pipe filter to sediment bowl
Slam-door style door locks LH and RH with provision for key-locks

bjj101 wrote:

So now I am retired (and the kitchen has been replaced) I'm allowed to start the truck refurbishment. There are lost of bits that I need to get, some of which are in the Club shop or other sources, but first I thought I'd ask here in case anyone has stuff to sell.

I do need a pair of propshafts and some rear shocks but they will probably be shop items. Other requirements include:

This is all for my RHD GS:
Body.
Diagonal hood bracing sticks, 4 lateral + 4 longitundinal.
Spare week mounting, any / all of the bits from the seat backrest upwards.
Rear pilar stiffeners, left and right (398455 and 398454).
Rear numberplate mounting plate.
Rear numberplate catch, both parts.
Towing pintle, front and rear plus reinforcement plates.
Battery top, back and inner panels. (398894, 398847, 398852)
Fuel filler neck (the part that fixes to the body and the cap goes on. Doesn't seem to be listed in the parts catalogue).
Heater vents and ducts, everything except the heaterbox which I have.

Engine / trans.
Rocker covers, left and right.
Transfer box high ratio gear set.
Diff lock actuator valve.
Oil cooler.
Brake shuttle valve and switch.

Other.
6 way light switch plus knob.
Water temperature gauge.
Speedo trip reset cable.
IR light switch.
Convoy light.

Overdrive

and winch

bjj101 · **Posted:** Mon May 06, 2019 3:48 pm

markspiers wrote:

I have a few bits in the garage, will try and have a sort out over weekend

Thanks Mark,
Some excellent bits, Inspires me to get started with the strip-down. Think I'll start after the next bank holiday. Have a truck open day on the Sunday, an open tuck day on the bank holiday, I e. convert it to an open top dune buggy (ensures it will rain), so the locals who always look at what's happening can have a play. Then reduce it to pile of parts and rebuild....

markspiers · **Posted:** Fri May 17, 2019 2:57 pm

Glad to be of help, will do mine one day,when the110 is done, all good fun, happy restoring

Fortnash · **Posted:** Wed May 22, 2019 5:57 pm

Hi There

Do you still require the rocker covers for your 101 :?:

bjj101 · **Posted:** Sat May 25, 2019 4:02 pm

Sorry didn't see your posting. Yes I am still looking for rocker covers.

Fortnash wrote:

Hi There

Do you still require the rocker covers for your 101 :?:

bjj101 · **Posted:** Thu May 30, 2019 9:18 am

Looks like it woud be better with replacement hoodsticks especially the two middle lateral 'hoops' and the middle longtitudinal long one. If anyone has any spares and isn't too far away for me to collect them.

bjj101 wrote:

So now I am retired (and the kitchen has been replaced) I'm allowed to start the truck refurbishment. There are lost of bits that I need to get, some of which are in the Club shop or other sources, but first I thought I'd ask here in case anyone has stuff to sell.

I do need a pair of propshafts and some rear shocks but they will probably be shop items. Other requirements include:

This is all for my RHD GS:
Body.
Diagonal hood bracing sticks, 4 lateral + 4 longitundinal.
Spare week mounting, any / all of the bits from the seat backrest upwards.
Rear pilar stiffeners, left and right (398455 and 398454).
Rear numberplate mounting plate.
Rear numberplate catch, both parts.
Reinforcing plates for Towing pintles, front and rear.
Battery top panel. (398852)
Fuel filler neck (595232).
Heater vents and ducts, everything except the heaterbox and the air box which I now have.

Engine / trans.
Rocker covers, left and right.
Transfer box high ratio gear set.
Diff lock actuator valve.
Oil cooler.
Brake shuttle valve and switch.

Other.
Water temperature gauge.
Speedo trip reset cable.
IR light switch.

Overdrive

and winch

bjj101 · **Posted:** Mon Mar 23, 2020 12:35 pm

Updated, some stuff got and removed from list, some still needed as below.

bjj101 wrote:

This is all for my RHD GS:
Body.
Diagonal hood bracing sticks, 4 lateral + 4 longitundinal.
Spare week mounting, any / all of the bits from the seat backrest upwards.
Rear pilar stiffeners, left and right (398455 and 398454).
Rear numberplate mounting plate.
Rear numberplate catch, both parts.
Reinforcing plates for Towing pintles, rear.
Battery top panel. (398852)
Fuel filler neck (595232).
Heater vents and ducts, everything except the heaterbox and the air box which I now have.

Engine / trans.
Rocker covers, left and right.
Diff lock actuator valve.
Brake shuttle valve switch.

Other.
IR light switch.

Overdrive

and winch

still optimistic.

Restoration parts required.

Who is online