101 club

101 club


101 Forward Control Club and Register Forums
It is currently Tue Aug 20, 2019 11:22 pm

All times are UTC




Post new topic Reply to topic  [ 14 posts ] 
Author Message
PostPosted: Wed Apr 24, 2019 11:21 am 
Offline
Active Member
User avatar

Joined: Thu May 07, 2015 7:31 am
Posts: 53
Location: Leyland
Mem No: 2668
Member until: Aug 2020
So now I am retired (and the kitchen has been replaced) I'm allowed to start the truck refurbishment. There are lost of bits that I need to get, some of which are in the Club shop or other sources, but first I thought I'd ask here in case anyone has stuff to sell.

I do need a pair of propshafts and some rear shocks but they will probably be shop items. Other requirements include:

This is all for my RHD GS:
Body.
Diagonal hood bracing sticks, 4 lateral + 4 longitundinal.
Spare week mounting, any / all of the bits from the seat backrest upwards.
Rear pilar stiffeners, left and right (398455 and 398454).
Rear numberplate mounting plate.
Rear numberplate catch, both parts.
Reinforcing plates for Towing pintles, front and rear.
Battery top panel. (398852)
Fuel filler neck (595232).
Heater vents and ducts, everything except the heaterbox and the air box which I now have.

Engine / trans.
Rocker covers, left and right.
Transfer box high ratio gear set.
Diff lock actuator valve.
Oil cooler.
Brake shuttle valve and switch.

Other.
Water temperature gauge.
Speedo trip reset cable.
IR light switch.


Overdrive :) and winch :D :lol:

_________________
101 GS RHD (nee LHD) 1976
Freelander 1 Soft-top 2001


Last edited by bjj101 on Thu May 30, 2019 9:21 am, edited 3 times in total.

Top
 Profile  
 
PostPosted: Fri Apr 26, 2019 9:46 pm 
Offline
101-derful!

Joined: Sat Jan 15, 2011 7:53 pm
Posts: 184
Mem No: 2356
Member until: Aug 2020
I have a few bits in the garage, will try and have a sort out over weekend


Top
 Profile  
 
PostPosted: Tue Apr 30, 2019 9:07 am 
Offline
Club Secretary
User avatar

Joined: Thu Jul 17, 2008 3:51 pm
Posts: 1588
Location: North Kent
Mem No: 2029
Member until: Aug 2020
Have a couple of items from your wish list which may be useful for you.

Both end panels and front panel for the battery box.
&
End terminal air box for the heater system, without the bulls eye vents.

Have tried several times to put photos up but having issues with this web site, and am now fed up with trying, my poor finger tips are turning scarlet with all the keyboard use.

_________________
Brian.
61 FL 39 / 94 AV 44 - 101 Radio/Utility Body 12v
63 FL 29 - 101 GS
56 FL 65 - Lightweight FFR 24v
55 KL 83 - Harley Davidson MT350
Unknown - Can Am Bombardier 250


Top
 Profile  
 
PostPosted: Tue Apr 30, 2019 9:08 am 
Offline
Club Secretary
User avatar

Joined: Thu Jul 17, 2008 3:51 pm
Posts: 1588
Location: North Kent
Mem No: 2029
Member until: Aug 2020
One - Battery Box


Attachments:
batt box.jpg
batt box.jpg [ 30.35 KiB | Viewed 907 times ]

_________________
Brian.
61 FL 39 / 94 AV 44 - 101 Radio/Utility Body 12v
63 FL 29 - 101 GS
56 FL 65 - Lightweight FFR 24v
55 KL 83 - Harley Davidson MT350
Unknown - Can Am Bombardier 250
Top
 Profile  
 
PostPosted: Tue Apr 30, 2019 9:09 am 
Offline
Club Secretary
User avatar

Joined: Thu Jul 17, 2008 3:51 pm
Posts: 1588
Location: North Kent
Mem No: 2029
Member until: Aug 2020
Two - Air Box


Attachments:
air box.jpg
air box.jpg [ 30.16 KiB | Viewed 907 times ]

_________________
Brian.
61 FL 39 / 94 AV 44 - 101 Radio/Utility Body 12v
63 FL 29 - 101 GS
56 FL 65 - Lightweight FFR 24v
55 KL 83 - Harley Davidson MT350
Unknown - Can Am Bombardier 250
Top
 Profile  
 
PostPosted: Tue Apr 30, 2019 9:10 am 
Offline
Club Secretary
User avatar

Joined: Thu Jul 17, 2008 3:51 pm
Posts: 1588
Location: North Kent
Mem No: 2029
Member until: Aug 2020
Done it... at great expense of my finger tips.

_________________
Brian.
61 FL 39 / 94 AV 44 - 101 Radio/Utility Body 12v
63 FL 29 - 101 GS
56 FL 65 - Lightweight FFR 24v
55 KL 83 - Harley Davidson MT350
Unknown - Can Am Bombardier 250


Top
 Profile  
 
PostPosted: Wed May 01, 2019 8:54 am 
Offline
Active Member
User avatar

Joined: Thu May 07, 2015 7:31 am
Posts: 53
Location: Leyland
Mem No: 2668
Member until: Aug 2020
Sorry about the fingers.
I'm interested. I will PM about cost and delivery.

Brinv8 wrote:
Done it... at great expense of my finger tips.

_________________
101 GS RHD (nee LHD) 1976
Freelander 1 Soft-top 2001


Top
 Profile  
 
PostPosted: Thu May 02, 2019 2:05 pm 
Offline
Club Secretary
User avatar

Joined: Thu Jul 17, 2008 3:51 pm
Posts: 1588
Location: North Kent
Mem No: 2029
Member until: Aug 2020
Hi Brian, have left message on your phone and email.

_________________
Brian.
61 FL 39 / 94 AV 44 - 101 Radio/Utility Body 12v
63 FL 29 - 101 GS
56 FL 65 - Lightweight FFR 24v
55 KL 83 - Harley Davidson MT350
Unknown - Can Am Bombardier 250


Top
 Profile  
 
PostPosted: Thu May 02, 2019 3:24 pm 
Offline
Active Member
User avatar

Joined: Thu May 07, 2015 7:31 am
Posts: 53
Location: Leyland
Mem No: 2668
Member until: Aug 2020
Addition to shopping list:

In tank fuel pump
Fuel filter
Fuel pipe filter to sediment bowl
Slam-door style door locks LH and RH with provision for key-locks


bjj101 wrote:
So now I am retired (and the kitchen has been replaced) I'm allowed to start the truck refurbishment. There are lost of bits that I need to get, some of which are in the Club shop or other sources, but first I thought I'd ask here in case anyone has stuff to sell.

I do need a pair of propshafts and some rear shocks but they will probably be shop items. Other requirements include:

This is all for my RHD GS:
Body.
Diagonal hood bracing sticks, 4 lateral + 4 longitundinal.
Spare week mounting, any / all of the bits from the seat backrest upwards.
Rear pilar stiffeners, left and right (398455 and 398454).
Rear numberplate mounting plate.
Rear numberplate catch, both parts.
Towing pintle, front and rear plus reinforcement plates.
Battery top, back and inner panels. (398894, 398847, 398852)
Fuel filler neck (the part that fixes to the body and the cap goes on. Doesn't seem to be listed in the parts catalogue).
Heater vents and ducts, everything except the heaterbox which I have.

Engine / trans.
Rocker covers, left and right.
Transfer box high ratio gear set.
Diff lock actuator valve.
Oil cooler.
Brake shuttle valve and switch.

Other.
6 way light switch plus knob.
Water temperature gauge.
Speedo trip reset cable.
IR light switch.
Convoy light.

Overdrive :) and winch :D :lol:

_________________
101 GS RHD (nee LHD) 1976
Freelander 1 Soft-top 2001


Top
 Profile  
 
PostPosted: Mon May 06, 2019 3:48 pm 
Offline
Active Member
User avatar

Joined: Thu May 07, 2015 7:31 am
Posts: 53
Location: Leyland
Mem No: 2668
Member until: Aug 2020
markspiers wrote:
I have a few bits in the garage, will try and have a sort out over weekend


Thanks Mark,
Some excellent bits, Inspires me to get started with the strip-down. Think I'll start after the next bank holiday. Have a truck open day on the Sunday, an open tuck day on the bank holiday, I e. convert it to an open top dune buggy (ensures it will rain), so the locals who always look at what's happening can have a play. Then reduce it to pile of parts and rebuild....

_________________
101 GS RHD (nee LHD) 1976
Freelander 1 Soft-top 2001


Top
 Profile  
 
PostPosted: Fri May 17, 2019 2:57 pm 
Offline
101-derful!

Joined: Sat Jan 15, 2011 7:53 pm
Posts: 184
Mem No: 2356
Member until: Aug 2020
Glad to be of help, will do mine one day,when the110 is done, all good fun, happy restoring


Top
 Profile  
 
PostPosted: Wed May 22, 2019 5:57 pm 
Offline
New Member

Joined: Wed May 22, 2019 5:53 pm
Posts: 1
Mem No: 2921
Member until: Expired

Fortnash - Please click here to renew your club membership!
Hi There

Do you still require the rocker covers for your 101 :?:


Top
 Profile  
 
PostPosted: Sat May 25, 2019 4:02 pm 
Offline
Active Member
User avatar

Joined: Thu May 07, 2015 7:31 am
Posts: 53
Location: Leyland
Mem No: 2668
Member until: Aug 2020
Sorry didn't see your posting. Yes I am still looking for rocker covers.

Fortnash wrote:
Hi There

Do you still require the rocker covers for your 101 :?:

_________________
101 GS RHD (nee LHD) 1976
Freelander 1 Soft-top 2001


Top
 Profile  
 
PostPosted: Thu May 30, 2019 9:18 am 
Offline
Active Member
User avatar

Joined: Thu May 07, 2015 7:31 am
Posts: 53
Location: Leyland
Mem No: 2668
Member until: Aug 2020
Looks like it woud be better with replacement hoodsticks especially the two middle lateral 'hoops' and the middle longtitudinal long one. If anyone has any spares and isn't too far away for me to collect them.

bjj101 wrote:
So now I am retired (and the kitchen has been replaced) I'm allowed to start the truck refurbishment. There are lost of bits that I need to get, some of which are in the Club shop or other sources, but first I thought I'd ask here in case anyone has stuff to sell.

I do need a pair of propshafts and some rear shocks but they will probably be shop items. Other requirements include:

This is all for my RHD GS:
Body.
Diagonal hood bracing sticks, 4 lateral + 4 longitundinal.
Spare week mounting, any / all of the bits from the seat backrest upwards.
Rear pilar stiffeners, left and right (398455 and 398454).
Rear numberplate mounting plate.
Rear numberplate catch, both parts.
Reinforcing plates for Towing pintles, front and rear.
Battery top panel. (398852)
Fuel filler neck (595232).
Heater vents and ducts, everything except the heaterbox and the air box which I now have.

Engine / trans.
Rocker covers, left and right.
Transfer box high ratio gear set.
Diff lock actuator valve.
Oil cooler.
Brake shuttle valve and switch.

Other.
Water temperature gauge.
Speedo trip reset cable.
IR light switch.


Overdrive :) and winch :D :lol:

_________________
101 GS RHD (nee LHD) 1976
Freelander 1 Soft-top 2001


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group