101 club
https://www.101club.org/forums/

FS: Motors, Tools and bits
https://www.101club.org/forums/viewtopic.php?f=10&t=1191
Page 1 of 1

Author:  minivin [ Sun Sep 14, 2008 12:04 pm ]
Post subject:  FS: Motors, Tools and bits

Not 101 bits, but may be of use to people, or part ex on some bits I need for my 101?

For Sale

1 x Parvalux geared 1PH motor, 230vac, 50Hz, 300/150RPM, Provisionally SOLD

1 x Flange mount 1PH motor, 0.18kW, 2700RPM, Provisionally SOLD

1 x Set of car ramps, rusty but solid, £5

1 x Weller De-Soldering Station, motor works and iron heats up, even comes with tools for cleaning the nozzle, comes with a box full of filters, Provisionally SOLD

1 x Foot mount 1PH motor, 230vac, 0.5HP, 50Hz, 1420RPM, £10
Image
Image

1 x Stick Welder, 240vac, 50Hz, 20->90A regulated output, £20
Image
Image

1 x Tough Case, 10"x16"x17" DxWxH, Provisionally SOLD


Open to bartering, P&P extra, prefer collection.

Amesbury Wiltshire

Author:  steveastrouk [ Sun Sep 14, 2008 12:42 pm ]
Post subject:  Re: FS: Motors, Tools and bits

minivin wrote:
Not 101 bits, but may be of use to people, or part ex on some bits I need for my 101?

For Sale

1 x Parvalux geared 1PH motor, 230vac, 50Hz, 300/150RPM, £5


How many HP is that ?

Steve

Author:  minivin [ Sun Sep 14, 2008 3:02 pm ]
Post subject:  Re: FS: Motors, Tools and bits

steveastrouk wrote:
minivin wrote:
Not 101 bits, but may be of use to people, or part ex on some bits I need for my 101?

For Sale

1 x Parvalux geared 1PH motor, 230vac, 50Hz, 300/150RPM, £5


How many HP is that ?

Steve


Unfortunately that part of the plate is blank, but the gear box specification says 17 LBS/INS. Quite a compact motor so guessing no more than 1/8HP

Author:  Horace1664 [ Sun Sep 14, 2008 3:03 pm ]
Post subject:  Re: FS: Motors, Tools and bits

minivin wrote:
Not 101 bits, but may be of use to people, or part ex on some bits I need for my 101? ...................................................................................... 1 x Weller De-Soldering Station, motor works and iron heats up, even comes with tools for cleaning the nozzle, comes with a box full of filters, £30...............................Open to bartering, P&P extra, prefer collection.

Amesbury Wiltshire


Yes please.
Do you have an idea of postage to my mum in Cambridge?
I do not require a fast service, as I'm not back to collect all my other purchases untill November.

James

Author:  steveastrouk [ Sun Sep 14, 2008 3:31 pm ]
Post subject:  Re: FS: Motors, Tools and bits

minivin wrote:
Unfortunately that part of the plate is blank, but the gear box specification says 17 LBS/INS. Quite a compact motor so guessing no more than 1/8HP


I'd like it.

Steve

Author:  minivin [ Sun Sep 14, 2008 3:58 pm ]
Post subject:  Re: FS: Motors, Tools and bits

steveastrouk wrote:
minivin wrote:
Unfortunately that part of the plate is blank, but the gear box specification says 17 LBS/INS. Quite a compact motor so guessing no more than 1/8HP


I'd like it.

Steve


Ok Steve, would you like to collect it, or shall I get it parcelled and weighed?

Author:  minivin [ Sun Sep 14, 2008 3:58 pm ]
Post subject:  Re: FS: Motors, Tools and bits

Horace1664 wrote:
Yes please.
Do you have an idea of postage to my mum in Cambridge?
I do not require a fast service, as I'm not back to collect all my other purchases untill November.

James


Hi James,

Someone has pipped you, but if they fall through I will let you know!

Regards

Rob

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/