101 club
http://www.101club.org/forums/

Exhaust manifolds
http://www.101club.org/forums/viewtopic.php?f=11&t=10218
Page 1 of 1

Author:  pussa13 [ Sun Nov 05, 2017 12:15 pm ]
Post subject:  Exhaust manifolds

Hello all, please be gentle, it's my first post, just hope I can get some help. I'm trying to get hold of a pair of V8 exhaust manifolds, any ideas please?
Thanks Russ

Author:  harry backhouse [ Sun Nov 05, 2017 1:22 pm ]
Post subject:  Re: Exhaust manifolds

Are yours cracked, broken or just missing?
These vehicles are fairly rare and as such it's good to repair if possible and never throw anything away, just my thoughts.


Sent from my iPad using Tapatalk

Author:  landyseb [ Sun Nov 05, 2017 2:27 pm ]
Post subject:  Re: Exhaust manifolds

Hi, manifolds are unique to this vehicle and as a result are getting very rare as they were pretty weak as standard. Look at a few threads within this forum and you will see people have repaired where possible and some folk have even modified p38 stainless manifolds to fit with some degree of success. It would be wise to explore all options and maybe you will come up with a fantastic solution that none of us have thought of!!!!

Cheers Adam........intrepid restorer of the shed.

Author:  pussa13 [ Sun Nov 05, 2017 3:11 pm ]
Post subject:  Re: Exhaust manifolds

Thanks lads, the studs are snapped off and we have tried and better tried to drill them out so we can tap new threads with no joy, we need to use it 3 or 4 times a week, I was just looking for a quick way out!
Thanks Russ

Author:  Brinv8 [ Mon Nov 06, 2017 8:16 am ]
Post subject:  Re: Exhaust manifolds

If it just the studs that are the problem, should be able to drill out and then use bolt nut and washers to fit down pipes.
Use good quality sharp drills, start small and increase size to required dimensions.

Author:  thermister [ Mon Nov 06, 2017 2:28 pm ]
Post subject:  Re: Exhaust manifolds

https://youtu.be/ceL3hYduaZ4 just been watching this vid check out the exhaust manifolds, food for thought the're not exactly tuned for gas extraction but it can be done.

Author:  ptsteer [ Mon Nov 06, 2017 8:49 pm ]
Post subject:  Re: Exhaust manifolds

Broken studs are a minor problem compared to cracks & should be easily drilled out & helicoiled. Some of the studs can even be fixed with a nut & bolt. If you don't want your scrap manifolds I will give you a tenner each for them. 8)

Author:  GSFFRLHD [ Mon Nov 06, 2017 10:37 pm ]
Post subject:  Re: Exhaust manifolds

To my way of thinking, the ultimate goal is to source replacement manifolds which fit the standard exhaust system - maintaining interchangeable parts as per the factory specification. I know 101 Parts/Able Engineering has been working for a while to come up with a stainless steel solution.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/