101 club
http://www.101club.org/forums/

gs steering wheel
http://www.101club.org/forums/viewtopic.php?f=11&t=10069
Page 1 of 1

Author:  paulmills [ Wed Jun 28, 2017 7:19 pm ]
Post subject:  gs steering wheel

wanted steering wheel for 101 gs 1976. original and good condition. prefer the south west uk for collection but post to me from anywhere. pm me :D

Author:  antarmike [ Wed Jun 28, 2017 8:56 pm ]
Post subject:  Re: gs steering wheel

I think one size fits all..... not model or year dependant..

Author:  paulmills [ Wed Jun 28, 2017 10:38 pm ]
Post subject:  Re: gs steering wheel

My ambulance is different to my gs. Gs has a horrible plastic locking thing and my ambulance is different to my mates gs. Different buttons in the middle.

Author:  antarmike [ Thu Jun 29, 2017 6:17 am ]
Post subject:  Re: gs steering wheel

NATO parts list (second edition) covers both GS and Ambulance (stretcher) models . Publication 22726 and it lists same steering wheel for both models.

Rover part Number 595224 or NSN 5530-99-524-6172.

Two other parts lists I have show only one steering wheel and give same Rover number 595224. (As does the Provisional parts catalogue)

I can only find one part number (or its NSN direct equivilent) in any publication I search.

Do you have a part number for the wheel you seek?

Are you sure your Ambulance has the correct steering wheel fitted?

Author:  47643 [ Thu Jun 29, 2017 8:05 am ]
Post subject:  Re: gs steering wheel

Hi all,
a series 3 steering wheel is fitted to mine.
nsn is 2530-99-824-6171.
it is fitted under misc instructions Q59 Instr No 14

Lindsay

Author:  antarmike [ Thu Jun 29, 2017 9:06 am ]
Post subject:  Re: gs steering wheel

47643 wrote:
Hi all,
a series 3 steering wheel is fitted to mine.
nsn is 2530-99-824-6171.
it is fitted under misc instructions Q59 Instr No 14

Lindsay


Was there a reason for this mod? Was it just unavailability of the original wheel in later life?

Have you a link to that EMER or a downloadable copy?

Author:  Les Adams [ Thu Jun 29, 2017 12:36 pm ]
Post subject:  Re: gs steering wheel

The original steering wheels became unobtainable some years ago and was the reason for the EMER. The Club did get a batch of new steering wheels, manufactured in China, for the club shop a few years ago. Its best to repair the original wheel if you don't wish to fit a Series 3 version as per EMER.

Les.

Author:  47643 [ Thu Jun 29, 2017 12:43 pm ]
Post subject:  Re: gs steering wheel

hi,
it was due to series 2 steering wheel no longer available.
sorry but cannot upload the doc. Les or Pete might have a copy.
mines was done on 24/1194 at Old Dalby
Lindsay

Author:  antarmike [ Thu Jun 29, 2017 2:38 pm ]
Post subject:  Re: gs steering wheel

47643 wrote:
hi,
it was due to series 2 steering wheel no longer available.
sorry but cannot upload the doc. Les or Pete might have a copy.
mines was done on 24/1194 at Old Dalby
Lindsay


The One Tonne never used a series 2 steering wheel. The original steering wheel was a new item, not used on any preceding model of Land-Rover.

Author:  Les Adams [ Thu Jun 29, 2017 5:44 pm ]
Post subject:  Re: gs steering wheel

The 101 original steering wheel was reputed to be from a fork lift, dumper or tractor, but as far as I know we never found the correct one? I thought the EMER is in the club member's download section on the club website home page, if it isn't, I have all the 101 EMERS, but have only managed to get these downloaded, as the IT officers have always been too busy to get it all downloaded. In fact I have given up trying to get the REME "Ease of Mainenance Assessment report", dated 1973 & 1975, having tried all the officers from Tom onwards.

Les.

Author:  Graeme [ Sat Jul 15, 2017 9:54 am ]
Post subject:  Re: gs steering wheel

Wasn't it a Benford dumper?

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/